Rubber Roofing in Torrington, Connecticut
Rubber roofing, meaning EPDM membrane, is one of the better systems available for flat and low-slope roofs in Torrington. Installed correctly, the membrane handles UV exposure, thermal cycling, the freeze-thaw pattern that shortens the life of other flat roof surfaces in Connecticut winters, and general weather punishment better than most alternatives at its price point. Installed poorly, the seams open up, the flashing pulls away at the perimeter, and the whole system leaks. The install is the entire story with rubber roofing.
Experts Roofing Restoration LLC installs EPDM rubber roofing for Torrington residential low-slope sections and light commercial buildings from our Waterbury base. Licensed under Connecticut HIC number 0705081 and BBB accredited with an A+ rating. Our rubber roofing crew works with both fully-adhered and mechanically-fastened EPDM installations, chosen based on the deck substrate, the roof slope and the exposure the roof will see.
Fully-adhered EPDM is bonded to the substrate with a continuous adhesive layer, which gives the tightest fit against the deck and the best performance in high wind areas. It is usually the right choice for Torrington residential low-slope sections where the roof is visible from the ground and appearance matters. Mechanically-fastened EPDM uses plates and screws through the membrane into the deck, with the seams overlapping the plates to prevent water infiltration. It is faster to install and often the right choice for larger commercial applications.
Seam work is where most EPDM failures start. Every seam gets primed and either taped with factory-manufactured tape or bonded with liquid adhesive per the manufacturer specification. Corners and T-joints get additional attention because they are where seam integrity is most likely to be compromised. Terminations at walls, parapets and curbs get proper counterflashing so the membrane edge is protected from wind uplift and water infiltration.
Every penetration through the membrane, from vent pipes to HVAC curbs to skylights, gets flashed with EPDM boots or field-fabricated flashing that is bonded to the field membrane with the same adhesive system. Sealant alone is not a permanent solution at penetrations on an EPDM roof and is not part of a code-compliant installation.
Rubber roofs also age well when they are maintained on a schedule. An annual walk-through catches any seam that has started to open, any flashing that has shifted, and any UV degradation at high-stress points. Resealing at those points early adds years to a membrane that would otherwise start failing before it needed to.
Written estimates for Torrington rubber roofing installations, tear-offs, and repairs on existing EPDM systems. Warranty on the workmanship and manufacturer coverage on the membrane itself, with terms on paper before any work starts. Annual maintenance programs for existing Torrington EPDM roofs are also available, with the inspection and any preventive resealing work priced as part of the ongoing scope rather than waiting for a leak to force an emergency call.
